Page History
Use this action to transmit audio from the Client's microphone to the selected speaker.
| Note | ||
|---|---|---|
| ||
If a Client is behind the NAT, you have to specify the external IP address of the switch for this Client with a port range of at least 1000 (see Network settings utility). |
To configure this action, do as follows:
- Configure the conditions to start a macro (see Configuring filters for event-driven macros).
- Select a speaker (1).
- Select a microphone (2).
- Specify sensitivity from 0 to 100 (3).
To stop sound, use the Stop voice notification from client command on the Client.
To configure this command, select a speaker (4) and a microphone (5).
Overview
Content Tools