Documentation for C-Werk 2.0.

Previous page Play audio on Server  Audio notification on Client Next page

Use this action to transmit audio from the Client's microphone to the selected speaker.

Attention!

If a Client is behind the NAT, you have to specify the external IP address of the switch for this Client with a port range of at least 1000 (see Network settings utility).

To configure this action, do as follows:

  1. Configure the conditions to start a macro (see Configuring filters for event-driven macros).
  2. Select a speaker (1).
  3. Select a microphone (2).
  4. Specify sensitivity from 0 to 100 (3).

To stop sound, use the Stop voice notification from client command on the Client.

To configure this command, select a speaker (4) and a microphone (5). 

  • No labels