Attention!
The Intellivision ANPR is not included in the basic C-Werk VMS distribution.
To configure IntelliVision ANPR:
Request the distribution from the Technical Support and install it.
Attention!
Only a 64-bit version is available.
- Copy an IntelliVision license into C:\Program Files\Common Files\Grundig\DetectorPack\IntelliVisionLPRlicense.txt.
- Select the IntelliVision license plate recognition object.
- If the camera supports multistreaming, select the stream for which detection is needed. Selecting a low-quality video stream allows reducing the load on the Server.
Select the country from the list (1).
Note
The list of supported countries is given in the manufacturer's specifications.
- Specify the maximum and minimum number of digits in the number (2, 6).
- Specify the maximum number of processor cores available for the detector. '0' means all cores (3).
- Set the maximum and minimum width of the vehicle number plate as a percentage of the FoV width (4, 8).
- Set minimum and maximum quality of ANPR (5, 9). The higher the minimum recognition quality, the less false detections will occur.
- Specify the minimum number of milliseconds between frames during recognition (7).
- Select recognition accuracy (10). The higher the accuracy, the higher the CPU load.
- In the Tracker timeout field, enter a time period in seconds. This is the time before detection starts again after a number plate is recognized (11).
You can configure an ANPR zone in FoV. The zone is resized by moving the anchor points
. 
Note
For your convenience, you can click the
button and configure the mask on a still frame / snapshot. To undo, click this button again.Note
Detection zone is displayed by default. You can click the
button to hide the zone. To undo, click this button again.- Click the Apply button.
Configuration of IntelliVision ANPR is now complete.