Get coordinates

GET http://IP-address:port/prefix/control/telemetry/position/TELEMETRYCONTROLID

Sample request:

GET http://127.0.0.1:80/control/telemetry/position/Server1/DeviceIpint.25/TelemetryControl.0

Sample response:

{
  "pan": 2000
  ,"tilt": 5100
  ,"zoom": 0
  ,"mask": 7
} 

The mask value should be converted to binary.

The first bit of the binary number will refer to pan, the second to tilt, the third to zoom.

The 1 value means that the corresponding component of the video camera works, 0 means it does not work.

For example, if mask = 6, then in the binary system it is 110, which means that pan and tilt work on the camera, and zoom does not.

For a camera with absolute telemetry, the coordinates will be relative.

{
  "pan": 5.53611111111111109e-02,
  "tilt": 1.31111111111111116e-02,
  "zoom": 0.00000000000000000e+00,
  "mask": 7
}