Configuring Logging levels

Logging levels differ in the list of events to be recorded in external logs, as well as the level of event specification (low, medium, high). Configuration of levels is carried out in the Logging levels tab of the log management utility.

To configure the logging level, you must perform the following steps:

1. Select the desired logging level of the Client (C-Werk Client) and the Server (C-Werk Server) (1).
   

   Note

   If you change the logging level of a Server, the server will be restarted.

   Note

   If the C-Werk VMS is installed in the Failover Server and Client configuration, you can log in as either a Client or a Supervisor.

   Logging level	Logging level description
   None	Event logging disabled
   Error	Low specification level – only system errors are logged
   Warning	Low level of detail - only system warnings and system errors are logged
   Info	Low level of detail - logs informational messages, system warnings, and system errors
   Debug	Medium level of detail - logs debugging events, informational messages, system warnings, and system errors
   Trace	High specification level – all system events are logged

2. If you need to include GUI exceptions into the logs, select the corresponding check box (2).

3. Click OK (3) to save changes.

Configuration of logging levels is complete.