Specific settings for Hands up detection tool

The Hands up detection tool triggers if a person with one or both hands raised is detected in a specified area.

To configure the Hands up detection tool, do the following:

1. Configure general settings (see Setting up common parameters for Pose detection tools).
2. Set the detection tool operation Mode (1):
   1. Both hands: triggers only if the person has both hands raised.
   2. One hand: triggers only if the person has one hand raised.
   3. Only left hand or Only right hand: triggers only if one selected hand is raised.
   4. Left or Right hand: triggers only if the selected hand is raised.
      
3. Set the minimum number of frames in which the counter should detect a person with a raised hand/hands in order to trigger (2). The value should be in the range [1; 20].

Configuring the Hands up detection tool is complete.