Documentation for C-Werk 2.0.

Previous page The PTZ Object  The Channel object Next page

With C-Werk, you can control the Wash&Wiper feature in some Axis IP devices (M7016, P7216, Q7404, Q7436 ) using HTTP-CGI commands.

To set HTTP-CGI commands, do as follows:

  1. Create presets for the camera, numbered as follows: 101, 102, 103 and 104 (see The Presets List).

  2. Go to the PTZ object and specify commands in the appropriate fields.

    Note

    The corresponding Camera object should have the Send settings to device option enabled (see The Camera object).

  3. Click the Apply button.

When the camera goes to the presets 101-104, this triggers a pre-configured command. 

  • No labels