Page History

...

1. Select the desired parameter from the Start Conditions list in the Statistics group.
   

2. Enter the parameter definition into the Item (1) field.

   

   Archive usage	Archive in the following format:hosts/SERVER1/MultimediaStorage.AliceBlue/MultimediaStorage,
   Disk usage	SERVER1@C:\  where SERVER1 is the name of a server within the

   Axxon

   C-Werk domain, C:\ is the volume name.
   Memory usage (RAM)	The name of a server within the

   Axxon

   C-Werk domain.
   Network usage	The name of a server within the

   Axxon

   C-Werk domain.
   CPU usage	The name of a server within the

   Axxon

   C-Werk domain.

   
   

3. Enter the threshold value into the Value (2) field.
4. For  Leaving condition, enter the range into the Delta (3) field (see section 5).Enter the threshold value into the Value (2) field.

5. From the Trend (4) list, select a triggering condition for the macro.
   
   

   Leaving	The macro is triggered if a parameter value goes out of the specified range [Value - Delta; Value].
   Rising	The macro is triggered if the parameter value exceeds the threshold specified in the Value field.
   Falling	The macro is triggered if the parameter value falls behind the threshold specified in the Value field.

   
   

   Note
   title Attention!
   The triggering conditions are set not for current but for future events. For instance, if the current CPU load is 85%, and you set the triggering condition to exceeding 80%, the macro will be launched only when the CPU load exceeds 80% value next time.

   
   

6. If necessary, you can set several event and/or statistical conditions for triggering macros.