Page History
...
In the Object identification group, you can enter a camera name, a short name and a comments.
| Info | ||
|---|---|---|
| ||
|
...
The IP address (assigned automatically and can be changed if necessary).
- The port used to transmit data between the camera and the C-Werk (this value is set to 80 by default, but can be changed if necessary). Initially, the port number is set via the camera's Web interface.
- The MAC address.
- Manufacturer, model, driver version and current firmware.
- The number of the video channel (for an IP Server).
Device serial number (for Axis devices only, see Axis IP Devices).
You can also customize a number of options shared by all video cameras in this group:
...
In the Authentication group, you can set the username and password to connect to the camera.
If the username and/or password for connecting to the camera are different from the factory settings, select No in the Default field and enter the current credentials.
...
To enable video buffering on Clients, set the buffer length in milliseconds in the Video buffering group. This value should be between 50 and 1000 milliseconds. If the value 0 is selected, video buffering is disabled.
In the Video stream settings the Other group, you can see video image parameters (contrast, brightness, color saturation, etc.). When configuring these, you can look up their descriptions in C-Werk interface. For more detailed information, please refer to the camera manual.
| Info | ||
|---|---|---|
| ||
You cannot edit these parameters if you added the camera with the parameters that were set in the web interface (see Adding and removing IP devices). To configure these parameters in C-Werk, set the Send settings to device checkbox. |
...
In the Other group, you can configure the parameters for the devices connected via the RTSP protocol (see Configuring connection of devices via RTSP).
In the Alternative camera 1 field, you can specify any camera in the current domain that can replace this camera on the layout when it isn't connected.
In the Geolocation group, you can specify the coordinates (latitude, longitude, azimuth) of the camera location (the coordinates are used when adding the camera to the geomap, see Adding video cameras and changing size of their icons on the map).
In a special case, when configuring an alarm layout (see Configuring Alarmed cameras layout), in these fields, you can specify the closest cameras this one for the simultaneous display.
...
Overview
Content Tools