...
Select Start -> All Programs -> C-Werk -> C-Werk
Info title Note The C-Werk software package program file C-Werk.exe is located in the folder <C-Werk installation folder>\C-Werk\bin\
Info title Note To start the client in Safe mode with OpenGL software emulation, select: Start-> Programs-> C-Werk-C-Werk (Safe mode).
The C-Werk client will then launch and an authorization window will appear
Select the Server (1).
Info title Note If the software is accessed by a remote user, the NetBIOS name or IP address of the computer with which the connection is established should be indicated in the Computer field
Info title Note To connect to a Server, which is behind theNATenter the outside local address in the registry:
1. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Grundig \ NGP and then NTServiceOpts.
2. Enter the IP address in the --ngp-alt-addr value of this parameter as shown in the figure.
3. Open the ports on the switch (the default ports are 49999-50099), that you specified on the server during installation. If necessary, you can change the number of ports used in -ngp-port-span (see p.18 Installation).
4. Save changes.
Note title Attention! When a client connects from an external network, only those servers that have access to the external network will be available in the C-Werk domain configuration.
Enter the user name and password (2) and click Connect.
Info title Note The first login to the system is done with the user root, which has administrator permissions . Enter root in the User Name and Password fields. The administrator then needs to configure the system for multi-user access described in detail in the section titled Configuring user permissions )
Note title Attention! The version of the Server and the version of the user's Client must be the same. The installed versions of the Drivers Pack must be the same as well. If the versions are different, a warning will be displayed. It is strongly recommended not to connect if the product versions do not match.
Tip - If the user requires the access confirmation by the system administrator, enter corresponding credentials and click Connect.
| Note | ||
|---|---|---|
| ||
When you first start the client, the archive settings tab opens (see Configuring Archives). After the archive is created, camera addition starts automatically (see Adding and removing IP devices). IP Device Discovery Wizard launches. |
...