Documentation for C-Werk 2.0.

Previous page The Channel object  Configure virtual inputs Next page

If a camera has a built-in or pluggable digital input, the Input object is displayed as a child object of the Camera in the object tree. The total number of Input objects for a camera corresponds to its number of pluggable digital inputs.

If a device is defined as an IP Server, Input will be displayed as a child of a Channel object in the object tree (see The Channel object).

To configure a Input object, perform the following:

  1. Select the Input object in the objects tree (1).

  2. Enable the device (2).

    Note

    If a input is a child of a Channel object, then:

    1. Turning on a input automatically enables its parent Channel object.
    2. Turning off all Input and Output child objects automatically disables their parent Channel object.
  3. Enter the name of the Input (3).
  4. Set the status to which the Input will be set when no alarm is present.
  5. Click the Apply button.

The Input will then be switched to its assigned work mode.
The current status of the Input is displayed in the Input information group.

If a Input is part of an IP server, the Input settings allow choosing the video camera of the IP server it will be matched to. When you do this, the Input object will appear as the child object of the specified camera in the object tree.

Configure virtual inputs