Documentation for C-Werk 2.0.

Previous page The Speaker Object  Configuring a Speaker Object Next page

To create a Speaker system object, you must perform the following steps:

  1. In the list of devices, highlight a Server object and click the Create voice notifier button (1). 

  2. In the Name field (1), enter the desired name of the Speaker object.
  3. Select the speaker mode: disabled, play back on Server, play back on Clients (2).  
  4. In the Audio files field (3), enter the full path to the audio notification file. This parameter is mandatory.

  5. In the Volume field (4), enter the desired speaker volume level.

    Note

    By default, IP device speakers are disabled. To enable, for the Enable value (1), select Yes. When configuring the speaker of an IP device, you can set other parameters as well, such as the compression algorithm for the audio signal sent to the speaker for playback (2). Which speaker parameters you can configure is determined by the protocol for integration of the IP device and the C-Werk software package.

  6. Click the Apply button.

Creation of the Speaker object is complete.