Documentation for C-Werk 2.0.

Previous page Creating and Configuring an Object  Checking Audio Notification Next page

To configure a Speaker object, you must perform the following steps:

  1. In the list of devices, highlight the Speaker object which needs to be configured (1).
  2. In the Name field (2), enter the desired name of the Speaker object.

  3. Select the speaker mode: disabled, play back on Server, play back on Clients (3).  

  4. In the Audio files field (4), enter the full path to the audio notification file.

  5. In the Volume field (5), enter the desired speaker volume level.

  6. To parent an IP device to a speaker:

    1. By default, IP device speakers are disabled. To enable, for the Enable value (1), select Yes.


    2. When configuring the speaker of an IP device, you can set other parameters as well, such as the compression algorithm for the audio signal sent to the speaker for playback (2). Which speaker parameters you can configure is determined by the protocol for integration of the IP device and the C-Werk software package.

    3. Choose a video camera to associate this speaker with (3). As a result of this operation, the selected camera will become a parent object for the speaker.

  7. Click the Apply button.

Configuration of the Speaker object is now complete.