Specific settings for Handrail holding detection tool

To configure the Handrail holding detection tool, do the following:

1. Set common parameters (see Setting up common parameters for Pose detection tools).
2. Click anywhere in the Preview window.

3. Mark one or several handrails with lines (1).
   
   

   Attention!

   • If lens distortion makes the handrail non-linear, use several lines.
   • The presence of a person in the staircase zone is determined by their lower limbs.
4. Set anchor points to specify the area where a person should hold the handrail (2).
    

Configuring the Handrail holding detection tool is complete.