Documentation for C-Werk 2.0.

Previous page Configuring equipment detection tool (PPE)  Example of providing a list of valid equipment at the facility Next page

Typical tasks for detecting personal protective equipment are the following:

  1. Detection in gateway conditions. A gateway is a border, which can be either a virtual line or a door, a barrier, a turnstile. The algorithm for working in gateway conditions is as follows:
    1. A person stops in front of an area where PPE is required.
    2. The person poses in a way that it is possible to check the presence of all items of equipment (the item is not overlapped by the person himself, other items of equipment, items of clothing).
    3. Human screening. There should be no obstacles between the person and the camera, blocking the person for screening.
  2. Detection in a production conditions: persons move freely in the detection area.

Note

By default, the Equipment detection tool (PPE) is configured for detection in gateway conditions.

The recommended settings for solving typical tasks are as follows:

Settings Equipment detection in gateway conditionsEquipment detection in production conditions
Main
The number of frames processed per second13
Minimum person height0,010,09
Minimum person width0,010,03
Advanced
Number of frames for analysis and output37
MaskNoNo
One event per item of equipmentYesYes
  • No labels