Page History

...

1. Connect the joystick to a computer.
2. Calibrate the joystick.
3. Select the joystick from the list and click the button . 
   Image RemovedImage Added
4. Set keyboard shortcuts, and click Apply.
5. Configure the sensitivity for PTZ controls:
   1. Start a text processor (i.e. Notepad) and open the file <Joystick_Name>.xml, which is located in C:\Users\<User_Name>\AppData\Local\Grundig\C-Werk\HotKeysXmlConfigurationFiles.

   2. Set the sensitivity for commands in <Sensitivity>0.2</Sensitivity>.

      No Format
      <HotKeysSchemaDeviceCommands> <CommandName>DiscreteZoomOut</CommandName> <HotKey>A2-</HotKey> <Sensitivity>0.2</Sensitivity> </HotKeysSchemaDeviceCommands>

      The sensitivity values range from 0.0 (low sensitivity) to 1.0 (high sensitivity). Please see the commands that have sensitivity settings in the table.

      Command	Command description
      DiscreteMoveXAxisRight	Pan right (Move right)
      DiscreteMoveXAxisLeft	Pan left (Move left)
      DiscreteMoveYAxisUp	Tilt up (Move up)
      DiscreteMoveYAxisDown	Tilt down (Move down)
      DiscreteZoomIn	Zoom in
      DiscreteZoomOut	Zoom out
      DiscreteFocusNear	Reduce the focal length
      DiscreteFocusFar	Increase the focal length
      DiscreteIrisOpen	Open the iris
      DiscreteIrisClose	Close the iris

      
      

      Note
      title Attention!
      Do not set values outside the range and edit other parameters in the file.

      
      

   3. Save the changes to the file.

...

1. Remove/Delete the joystick from the C-Werk VMS.
   Image RemovedImage Added
2. Click the Apply button.
3. Add and configure the joystick again.