Page History

To configure alarm processing in the system, do the following:

1. Go to Settings → Options (1) Options → Alarm processing(2).
   Image Removed

2. In the Time period of operator reaction to alarm field, enter the time during which the alarm should be taken into processing, otherwise it will be assigned the Skipped status(3). The minimum value is 2 minutes.

   Info
   title Note
   To take an alarm into processing, it is necessary to switch to the alarm management mode.

   
   

   Info
   title Note
   After an alarm is taken into processing, the time for handling it is not limited.

   
   

3. Set the maximum time for an alarm to stay on a special layout (4, see Working with Special layouts). After the specified time has elapsed, the alarm will be removed from the layout and its place will be taken by the next one, which has not yet been displayed on the layout.

4. Select the alarm assessment, after accepting which the operator is required to enter a comment (5).

5. Click the Apply button.

Configuration of alarm processing is now complete.