...
Select Start -> All Programs -> C-Werk -> C-Werk
Info title Note The C-Werk software package program file C-Werk.exe is located in the folder <C-Werk installation folder>\C-Werk\bin\
Info title Note To start the client in Safe mode with OpenGL software emulation, select: Start-> Programs-> C-Werk-C-Werk (Safe mode).
The C-Werk client will then launch and an authorization window will appear
Select the Server (1).
Info title Note If the software is accessed by a remote user, the NetBIOS name or IP address of the computer with which the connection is established should be indicated in the Computer field
Info title Note To connect to a Server, which is behind theNATenter the outside local address in the registry:
1. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Grundig \ NGP and then NTServiceOpts.
2. Enter the IP address in the --ngp-alt-addr value of this parameter as shown in the figure.
3. Open the ports on the switch (the default ports are 49999-50099), that you specified on the server during installation. If necessary, you can change the number of ports used in -ngp-port-span (see p.18 Installation).
4. Save changes.
Note title Attention! When a client connects from an external network, only those servers that have access to the external network will be available in the C-Werk domain configuration.
- Enter the user name and password (2) and click Connect.
...
If authorization is successful, a video surveillance monitor will be displayed on the screen.
| Info | ||
|---|---|---|
| ||
If C-Werk is launched in Viewer mode, then after you enter the authorization parameters, a message to this effect will appear (see the section C-Werk in Viewer mode) |
...