Creation and configuration of the Video camera object is done in the Hardware tab. The object tree of a video camera is generated automatically according to its functions which are integrated into the Axxon Next C-Werk software package (the presence of alarm inputs, relay outputs, PTZ unit, etc.).
...
The IP address (assigned automatically and can be changed if necessary).
Info title Note The port used to transmit data between the camera and the Axxon Next C-Werk VMS (this value is set to 80 by default but can be changed if necessary).
- At first the port number is set through the camera's Web interface.
- The MAC address.
- Manufacturer, model, firmware.
- The number of the video channel (for an IP Server).
...
In the Camera settings group you can see video image parameters (contrast, brightness, color saturation, etc.). When configuring these, you can look up short parameters' descriptions in Axxon Next C-Werk GUI. For more detailed information, please refer to the camera manual.
...
Select a standby / substitute camera from the current Axxon C-Werk domain in the Alternative camera list. The sub camera shows in the layout when the main camera is offline.
...
| Info | ||
|---|---|---|
| ||
To configure video streams, use the settings available in the Axxon Next C-Werk interface, not the web interface of the camera itself. |
| Note | ||
|---|---|---|
| ||
You can any select any stream for live view or recording (see Selecting video stream quality in a viewing tile, Binding a camera to an archive). |
...