Page History

...

1. In the list of devices, select the Email notifier object which needs to be configured (1).
   
2. Activate the Email notifier object by selecting Yes in the Enable list (2).
3. In the Name field (3) enter the required name of the E-mail notifier object.

4. Select the mode for sending the E-mail notifications: through C-Werk Cloud or through the specified SMTP Server (4).

   Note
   title Attention!
   To send notifications through C-Werk Cloud, you should connect to it (see Connecting Domain to C-Werk Cloud). C-Werk Cloud has a limit of 10 messages a day.

   
   

   Info
   title Note
   Message through C-Werk Cloud will be sent within a minute.

   
   

5. Configure the SMTP Server, if this mode was selected (5):

   1. In the Outgoing mail server field, enter the outgoing E-mail SMTP Server.
   2. In the Password field, enter the password of the user account on the outgoing E-mail Server.
   3. In the Port field, enter the number of the port used by the outgoing E-mail Server.

   4. In the SSL certificate field, specify the path to the SSL certificate file, if you use this protocol. If no certificate is specified, but the Use SSL parameter is enabled, then the E-mail Server certificate will be used.

   5. If you need to use SSL-encrypted connection when connecting to the outgoing E-mail Server, select Yes from the Use SSL list.
   6. In the Name field, enter the name of the user account used to send messages on the outgoing E-mail Server.

6. In the From field, enter the E-mail address from which the messages will be sent (6).

   Note
   title Attention!
   When using email notification, E-mail Servers may disable the user account or deny authentication in some cases. We recommend you to disable all security parameters in your email account beforehand.

   
   

7. In the Recipients field (7), enter one or several E-mail addresses to which messages will be sent.

8. Click the Apply button.

...