Appearance in area detection

To configure the detection tool, do the following:

1. Select the Appearance in area object.
   

2. Configure the parameters of the captured face (just as with the detected objects, see Configuring detected objects).

   The object class should be either Any or Face.

   
   

   The metadata from the Face detection tool do not include color characteristics, so the color setting is not relevant for this detection tool.

   
   

3. In the preview window, set an area inside the FOV where a person should appear. This is similar to the Scene analytics detection tools (see Configuring the Detection Zone).
4. Click the Apply button.

Configuring the Appearance in area detection tool is complete.

Loitering in area detection

To configure the detection tool, do the following:

1. Select the Loitering in area object.
   
2. In the Event duration to trigger detection (sec) field, set the maximum time in seconds of the object loitering in the analyzed area. When this time is exceeded, the detection tool will trigger. The value should be in the range [0; 86400]. 

3. Configure the parameters of the captured face (just as with the detected objects, see Configuring detected objects).

   The object class should be either Any or Face.

   The metadata from the Face detection tool do not include color characteristics, so the color setting is not relevant for this detection tool.

4. In the preview window, set an area inside the FOV where a person should loiter. This is similar to the Scene analytics detection tools (see Configuring the Detection Zone).
5. Click the Apply button.

Configuring the Loitering in area detection tool is complete.