Axxon Next C-Werk supports connecting devices via the Chinese standard GB/T28181. As of when this document was written, Axxon Next C-Werk supports H.264 video and telemetry. For the most up-to-date information on this standard and the features supported in Axxon NextC-Werk, see the Documentation Drivers Pack.
Info | ||
---|---|---|
| ||
Configuration of IP devices connected via GB/T28181 is performed through the web interface of the devices. Settings are not sent from Axxon Next C-Werk to the device. |
Before connecting a camera via this protocol to Axxon NextC-Werk, perform the following steps to configure the device:
...
Info | ||
---|---|---|
| ||
Addition of cameras via GB/T28181 to Axxon Next C-Werk must be performed manually. |
After configuring the device as described earlier, add it to Axxon Next C-Werk as follows:
- Run the IP discovery wizard (see Adding and removing IP devices).
- In the form for manually adding an IP device, in the Manufacturer list, select GBT28181 (1).
- In the IP field, enter the Device ID used for configuring the IP device (2).
- In the Port field, enter 5060 (2).
- Enter the user name and password for connecting to the device (3).
- Click the button.
...