| Note | ||
|---|---|---|
| ||
|
To configure IntelliVision ANPR:
Request the distribution from the Technical Support and install it.
Note title Attention! Only a 64-bit version is available.
- Copy an IntelliVision license into C:\Program Files\Common Files\AxxonSoftGrundig\DetectorPack\IntelliVisionLPRlicense.txt.
- Select the IntelliVision license plate recognition object.
- If the camera supports multistreaming, select the stream for which detection is needed. Selecting a low-quality video stream allows reducing the load on the Server.
Select the country from the list (1).
Info title Note The list of supported countries is given in the manufacturer's specifications.
- Specify the maximum and minimum number of digits in the number (2, 6).
- Specify the maximum number of processor cores available for the detector. '0' means all cores (3).
- Set the maximum and minimum width of the vehicle number plate as a percentage of the FoV width (4, 8).
- Set minimum and maximum quality of ANPR (5, 9). The higher the minimum recognition quality, the less false detections will occur.
- Specify the minimum number of milliseconds between frames during recognition (7).
- Select recognition accuracy (10). The higher the accuracy, the higher the CPU load.
- In the Tracker timeout field, enter a time period in seconds. This is the time before detection starts again after a number plate is recognized (11).
You can configure an ANPR zone in FoV. The zone is resized by moving the anchor points
. Info title Note For your convenience, you can click the
button and configure the mask on a still frame / snapshot. To undo, click this button again.
Info title Note Detection zone is displayed by default. You can click the
- Click the Apply button.
...