...
If the cameras doesn't support multistreaming, then it will the low quality video stream disabled.
Info | ||
---|---|---|
| ||
In some cases (for example, if you do not have video from a camera), you may need to synchronize the time between the server and the camera when you connect them via ONVIF. |
Note | ||
---|---|---|
| ||
If you connect cameras via ONVIF, auto focus (AF) and auto aperture are not available |
Resolution
Axxon Next C-Werk offers three resolutions for video from cameras connected via ONVIF: maximum, medium, and minimum.
...
- Go to the Telemetry object (see The Telemetry PTZ Object).
- Select Yes in the Use device presets option (2).
- For Standard presets (3), select one of two values:
- Use in device presets order - C- Axxon Next Werk uses the direct order of presets on your device.
- Use in reversed device presets order - Axxon Next C-Werk uses the reversed order of presets on your device.
- Save changes.
- Create the required number of presets (see The Presets List)
...
To connect IP devices which only partially support ONVIF functions to the Axxon Next C-Werk software package, you must use an ONVIF driver (1) with compatibility mode enabled.
...
Compatibility mode makes it possible to receive a video image from video cameras; however, some capabilities of the Axxon Next C-Werk software package will be unavailable.
Enabling compatibility mode for a video camera (2) connected using the ONVIF protocol (1) is recommended if the connection settings are correct, but there is no video image.
...