If the camera has a built-in or pluggable digital output, the Relay Output object is automatically displayed as a child of Channel in the object tree. The number of Relay Output objects for a video camera is equal to the number of discrete outputs for the camera.
To configure a Relay Output object, perform the following:
- Select a Relay Output object in the objects tree.
Enable the device (1).
Info title Note When a relay Output is enabled, the Channel parent object is automatically enabled.
When you disable all child objects, the Sensor Input and Relay Output parent object Channel are also disabled.
- Enter the name of the relay Output (2).
- Set the status to which the relay Output will be set when no alarm is present.
- Click the Apply button.
The relay Output will then be switched to its assigned work mode.
To check the functioning of the relayOutput, click the Test button. If the relay Output is configured correctly, its status will briefly change.
If a relay Output is part of an IP server, the sensor settings allow choosing the video camera of the IP server it will be matched to. When you do this, the relay Output object will appear as the child object of the specified camera in the object tree.
...